2 edition of Analysis of the sintering force in copper. found in the catalog.
|The Physical Object|
|Pagination||xvi, 53 p. :|
|Number of Pages||55|
nodata File Size: 5MB.
Akut energibrist: En planeringsmodell : utredning fran Statens industriverk (Utredning fran Statens industriverk ; SIND 1979:2)
This growing grain is accompanied by the dissolution of grains in its immediate vicinity, as is observed most significantly between steps 10 and 11 in Fig. : 2 Accordingly, TD is the determining factor for the TC value of a particular bulk material as the value of density and specific heat were almost unchanged with the increase of temperature Supplementary Table.
The graphene network architecture, taking advantages of the interlocking behaviors between the matrix and the reinforcement, offers a new strategy to break through the limitations. Issue Date : August 2011• Preparation of sample Polishing is defined as the process of making the fine surface of the specimen performed after manufacturing of that using specimen polishing methods.
These isolated areas become closed porosity, since they are cut off from the outside environment. Sintering: Sintering is the process of compacting and forming Fig.
The dramatic difference attracted us to proceed to explore the formation mechanism of our continuous 3D-GLNN in the metal matrix. The density, surface roughness and mechanical properties of the laser sintering parts due to variation of process parameters were measured and analysed. Under the same conditions, the surface tension of a sinterable solid can be determined through a measurement of the sintering force.
Vacuum sintering is mainly applicable to refractory metals and stainless steel.
In our strategy, we proposed an in-situ growth route, which starts from controllable synthesis of GLNs on Cu powders by using an ambient-pressure RTA method.
During the hot-pressing process, parameters such as pressure, holding temperature would have great influence on the formation of the continuous network of 3D-GLNN.